• Heavy-duty, all steel
• Tilt table, 45 degrees down – 15 degrees up
• Optional: MG10 mitre gauge
• 10" aluminum disc
• 5/8" arbor
• 6" x 11" table
• 1/2 HP (110/220V), 1 PH TEFC motor
• 48 lbs.
• Model: DS10

• 10" diameter disc sander complete with enclosed stand and vacuum dust collector. 100 CFM vacuum base. Paper & cloth filter bags.
• 1/2 HP, 1 PH 110V TEFC motor.
• 110 lbs. Dims: L12 x W14 x H46
• Model: DS10V
• Filter bags, 5 pack paper # 22211, cloth bag # 5X878
  

• Heavy-duty, all steel
• Tilt table
• Optional: MG12 mitre gauge
• 12? aluminum disc
• 5/8" arbor
• 8" x 14" table
• 1 HP (110/220V) 1 PH TEFC motor
• 85 lbs.
• Model: DS12
• Optional: 1Hp 3Ph, 220 or 440v (Please specify voltage)

• Complete with enclosed stand and 100 CFM vacuum dust collector.
• 1 HP, 1 PH 110V, Dims: L12 x W14 x H46
• Paper filter bags # 22211, cloth bag # 5X878
• Wt:150 lbs.
• Model: DS12V

• Great for steel, aluminum and wood. Work table raises and lowers to expose more disc area and tilts 45 degrees down.
• 2 HP , 3 PH, (220/440V) or 1-1/2 HP, 1 PH (110/220V).
• 20" dia. steel disc, uses PSA adhesive sanding discs, 1 included.
• Reversing drum switch.
• 1740 RPM
• Tilt table with miter gauge, tilts 45 degrees down, raises and lowers 6".
• Tilt table dimensions: 27" wide x 10.5" deep, 3/4" x 1/4" slot in table.
• Dimensions: height 49" , width 27" , depth 28".
• Optional: manual foot brake, vacuum attachment.
  528 lbs.
• Model: DS20-3 220 or 440 volt, 3 phase ( specify voltage)
• Model: DS20-1 110 or 220 volt, 1 phase ( specify voltage)

• Other Diameters available, wet or dry! Please inquire for a quote on special sizes!
• 2 hp. , 1ph or 3 ph., 24" diameter disc holder
• Manual switch
• Great for flattening of parts!
• WT: 250 lbs.
• Model: DS24H

Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on Kalamazoo GRINDERS AND SANDERS.